Descripción del título

This paper presents an exploration of different scientific and technological research applied to the field of communications, in which two techniques of external optical modulation were analyzed: in phase and in amplitude, which are concerned with modulating the optical carrier signal externally to the semiconductor laser of the transmitter, in order to base the physical behavior of these modulators, their basic parameters (transmission index, reflection, absorption), their spectral composition and the luminous intensity generated by the laser at a constant time (wave laser keep going). Thanks to this it was possible to establish the differences, advantages and disadvantages of the two types of external optical modulation and finally it was identified that the external optical modulation in amplitude, is the most efficient technique since it does not present distortion, it transmits a greater power, it transfers a large amount of information in very short periods of time, does not generate losses and is not affected by the phenomenon of chromatic dispersion in the optical fiber. However, if the crystal is replaced by graphene, it improves the modulator response but limits its operation to a near-infrared wavelength, therefore, it is concluded that when using other materials of semiconductor nature, it expands the study of optical modulation, and employability varies by application and approach
En este documento se presenta una exploración de diferentes investigaciones científicas y tecnológicas aplicadas al campo de las comunicaciones, en donde se analizaron dos técnicas de modulación óptica externa: en fase y en amplitud, las cuales se ocupan de modular la señal portadora óptica de forma externa al láser semiconductor del transmisor, con el objetivo de fundamentar el comportamiento físico de estos moduladores, sus parámetros básicos (índice de transmisión, reflexión, absorción), su composición espectral y la intensidad lumínica que genera el láser ante un tiempo constante (láser de onda continua). Gracias a ello se logró establecer las diferencias, ventajas y desventajas de los dos tipos de modulación óptica externa y finalmente se identificó que la modulación óptica externa en amplitud, es la técnica más eficiente ya que no presenta distorsión, transmite una mayor potencia, transfiere una gran cantidad de información en lapsos de tiempo muy cortos, no genera pérdidas y no se ve afectada por el fenómeno de dispersión cromática en la fibra óptica. Sin embargo, si se reemplaza el cristal de por el grafeno mejora la respuesta del modulador, pero limita su operación de trabajo a una longitud de onda cercana al infrarrojo, por lo tanto, se concluye que al utilizar otros materiales de naturaleza semiconductora se amplía el estudio de la modulación óptica, y la empleabilidad varía según las aplicaciones y el enfoque
Analítica
analitica Rebiun33856202 https://catalogo.rebiun.org/rebiun/record/Rebiun33856202 230421s2019 xx o 000 0 spa d https://dialnet.unirioja.es/servlet/oaiart?codigo=8742502 (Revista) ISSN 2389-9484 S9M oai:dialnet.unirioja.es:ART0001570979 https://dialnet.unirioja.es/oai/OAIHandler 16 DGCNT S9M S9M dc Análisis de modulación óptica externa en dispositivos semiconductores electronic resource] 2019 application/pdf Open access content. Open access content star This paper presents an exploration of different scientific and technological research applied to the field of communications, in which two techniques of external optical modulation were analyzed: in phase and in amplitude, which are concerned with modulating the optical carrier signal externally to the semiconductor laser of the transmitter, in order to base the physical behavior of these modulators, their basic parameters (transmission index, reflection, absorption), their spectral composition and the luminous intensity generated by the laser at a constant time (wave laser keep going). Thanks to this it was possible to establish the differences, advantages and disadvantages of the two types of external optical modulation and finally it was identified that the external optical modulation in amplitude, is the most efficient technique since it does not present distortion, it transmits a greater power, it transfers a large amount of information in very short periods of time, does not generate losses and is not affected by the phenomenon of chromatic dispersion in the optical fiber. However, if the crystal is replaced by graphene, it improves the modulator response but limits its operation to a near-infrared wavelength, therefore, it is concluded that when using other materials of semiconductor nature, it expands the study of optical modulation, and employability varies by application and approach En este documento se presenta una exploración de diferentes investigaciones científicas y tecnológicas aplicadas al campo de las comunicaciones, en donde se analizaron dos técnicas de modulación óptica externa: en fase y en amplitud, las cuales se ocupan de modular la señal portadora óptica de forma externa al láser semiconductor del transmisor, con el objetivo de fundamentar el comportamiento físico de estos moduladores, sus parámetros básicos (índice de transmisión, reflexión, absorción), su composición espectral y la intensidad lumínica que genera el láser ante un tiempo constante (láser de onda continua). Gracias a ello se logró establecer las diferencias, ventajas y desventajas de los dos tipos de modulación óptica externa y finalmente se identificó que la modulación óptica externa en amplitud, es la técnica más eficiente ya que no presenta distorsión, transmite una mayor potencia, transfiere una gran cantidad de información en lapsos de tiempo muy cortos, no genera pérdidas y no se ve afectada por el fenómeno de dispersión cromática en la fibra óptica. Sin embargo, si se reemplaza el cristal de por el grafeno mejora la respuesta del modulador, pero limita su operación de trabajo a una longitud de onda cercana al infrarrojo, por lo tanto, se concluye que al utilizar otros materiales de naturaleza semiconductora se amplía el estudio de la modulación óptica, y la empleabilidad varía según las aplicaciones y el enfoque LICENCIA DE USO: Los documentos a texto completo incluidos en Dialnet son de acceso libre y propiedad de sus autores y/o editores. Por tanto, cualquier acto de reproducción, distribución, comunicación pública y/o transformación total o parcial requiere el consentimiento expreso y escrito de aquéllos. Cualquier enlace al texto completo de estos documentos deberá hacerse a través de la URL oficial de éstos en Dialnet. Más información: https://dialnet.unirioja.es/info/derechosOAI | INTELLECTUAL PROPERTY RIGHTS STATEMENT: Full text documents hosted by Dialnet are protected by copyright and/or related rights. This digital object is accessible without charge, but its use is subject to the licensing conditions set by its authors or editors. Unless expressly stated otherwise in the licensing conditions, you are free to linking, browsing, printing and making a copy for your own personal purposes. All other acts of reproduction and communication to the public are subject to the licensing conditions expressed by editors and authors and require consent from them. Any link to this document should be made using its official URL in Dialnet. More info: https://dialnet.unirioja.es/info/derechosOAI Spanish text (article) Silva, O. cre Viloria, J. cre Campos, C. cre Castillo, Á. cre Maestre, K. cre Miranda, K. cre Ocampo, M. cre Ciencia e Ingeniería: Revista de investigación interdisciplinar en biodiversidad y desarrollo sostenible, ciencia, tecnología e innovación y procesos productivos industriales, ISSN 2389-9484, Vol. 6, Nº. 1, 2019 (Ejemplar dedicado a: Ciencia e Ingeniería - ISSN 2389-9484 (enero-junio); e073) Ciencia e Ingeniería: Revista de investigación interdisciplinar en biodiversidad y desarrollo sostenible, ciencia, tecnología e innovación y procesos productivos industriales, ISSN 2389-9484, Vol. 6, Nº. 1, 2019 (Ejemplar dedicado a: Ciencia e Ingeniería - ISSN 2389-9484 (enero-junio); e073) Ciencia e Ingeniería: Revista de investigación interdisciplinar en biodiversidad y desarrollo sostenible, ciencia, tecnología e innovación y procesos productivos industriales, ISSN 2389-9484, Vol. 6, Nº. 1, 2019 (Ejemplar dedicado a: Ciencia e Ingeniería - ISSN 2389-9484 (enero-junio); e073)